diff --git a/acs/nladmin-system/src/main/java/org/nl/acs/device/device_driver/standard_inspect/ItemProtocol.java b/acs/nladmin-system/src/main/java/org/nl/acs/device/device_driver/standard_inspect/ItemProtocol.java
index e8a79ee..2a53e45 100644
--- a/acs/nladmin-system/src/main/java/org/nl/acs/device/device_driver/standard_inspect/ItemProtocol.java
+++ b/acs/nladmin-system/src/main/java/org/nl/acs/device/device_driver/standard_inspect/ItemProtocol.java
@@ -44,12 +44,12 @@ public class ItemProtocol {
 
     public static List<ItemDto> getReadableItemDtos() {
         ArrayList list = new ArrayList();
-        list.add(new ItemDto(item_heartbeat, "心跳", "DB100.B0"));
-        list.add(new ItemDto(item_mode, "工作模式", "DB100.B2", Boolean.valueOf(true)));
-        list.add(new ItemDto(item_move, "光电开关信号", "DB100.B3"));
-        list.add(new ItemDto(item_action, "动作信号", "DB100.B4"));
-        list.add(new ItemDto(item_error, "报警信号", "DB100.B5"));
-        list.add(new ItemDto(item_task, "任务号", "DB100.D6"));
+        list.add(new ItemDto(item_heartbeat, "心跳", "DB112.B0"));
+        list.add(new ItemDto(item_mode, "工作模式", "DB112.B2", Boolean.valueOf(true)));
+        list.add(new ItemDto(item_move, "光电开关信号", "DB112.B3"));
+        list.add(new ItemDto(item_action, "动作信号", "DB112.B4"));
+        list.add(new ItemDto(item_error, "报警信号", "DB112.B5"));
+        list.add(new ItemDto(item_task, "任务号", "DB112.D6"));
         return list;
     }
 
diff --git a/acs/nladmin-system/src/main/java/org/nl/acs/device_driver/basedriver/agv/ndcone/AgvNdcOneDeviceDriver.java b/acs/nladmin-system/src/main/java/org/nl/acs/device_driver/basedriver/agv/ndcone/AgvNdcOneDeviceDriver.java
index f5efc05..dae5f3d 100644
--- a/acs/nladmin-system/src/main/java/org/nl/acs/device_driver/basedriver/agv/ndcone/AgvNdcOneDeviceDriver.java
+++ b/acs/nladmin-system/src/main/java/org/nl/acs/device_driver/basedriver/agv/ndcone/AgvNdcOneDeviceDriver.java
@@ -454,7 +454,7 @@ public class AgvNdcOneDeviceDriver extends AbstractDeviceDriver implements Devic
                 lnshPalletizingManipulatorSiteDeviceDriver = (LnshPalletizingManipulatorSiteDeviceDriver) device.getDeviceDriver();
                 lnshPalletizingManipulatorSiteDeviceDriver.writing(2);
                 if (lnshPalletizingManipulatorSiteDeviceDriver.getMode() != 0
-                        && lnshPalletizingManipulatorSiteDeviceDriver.getMove() != 0
+                        && lnshPalletizingManipulatorSiteDeviceDriver.getMove() == 0
                         && (lnshPalletizingManipulatorSiteDeviceDriver.getIo_action() == 3 || lnshPalletizingManipulatorSiteDeviceDriver.getIo_action() == 2)
                        ) {
                     inst.setExecute_status("5");
@@ -484,7 +484,7 @@ public class AgvNdcOneDeviceDriver extends AbstractDeviceDriver implements Devic
                 lnshStationDeviceDriver = (LnshStationDeviceDriver) device.getDeviceDriver();
                 lnshStationDeviceDriver.writing(2);
                 if (lnshStationDeviceDriver.getMode() != 0
-                        && lnshStationDeviceDriver.getMove() != 0
+                        && lnshStationDeviceDriver.getMove() == 0
                         && (lnshStationDeviceDriver.getIo_action() == 3 || lnshStationDeviceDriver.getIo_action() == 2)
                 ) {
                     inst.setExecute_status("5");
@@ -514,7 +514,7 @@ public class AgvNdcOneDeviceDriver extends AbstractDeviceDriver implements Devic
                 conveyorPressStationDeviceDriver = (ConveyorPressStationDeviceDriver) device.getDeviceDriver();
                 conveyorPressStationDeviceDriver.writing(2);
                 if (conveyorPressStationDeviceDriver.getMode() != 0
-                        && conveyorPressStationDeviceDriver.getMove() != 0
+                        && conveyorPressStationDeviceDriver.getMove() == 0
                         && (conveyorPressStationDeviceDriver.getIo_action() == 3 || conveyorPressStationDeviceDriver.getIo_action() == 2)
                 ) {
                     inst.setExecute_status("5");
diff --git a/acs/nladmin-system/src/main/java/org/nl/acs/device_driver/lnsh/lnsh_Laminating_machine/ItemProtocol.java b/acs/nladmin-system/src/main/java/org/nl/acs/device_driver/lnsh/lnsh_Laminating_machine/ItemProtocol.java
index 173ce96..a7eb617 100644
--- a/acs/nladmin-system/src/main/java/org/nl/acs/device_driver/lnsh/lnsh_Laminating_machine/ItemProtocol.java
+++ b/acs/nladmin-system/src/main/java/org/nl/acs/device_driver/lnsh/lnsh_Laminating_machine/ItemProtocol.java
@@ -102,21 +102,21 @@ public class ItemProtocol {
 
     public static List<ItemDto> getReadableItemDtos() {
         ArrayList list = new ArrayList();
-        list.add(new ItemDto(item_heartbeat, "心跳", "DB100.B0"));
-        list.add(new ItemDto(item_mode, "工作模式", "DB100.B1", Boolean.valueOf(true)));
-        list.add(new ItemDto(item_move, "光电开关信号", "DB100.B2"));
-        list.add(new ItemDto(item_container_type, "托盘类型", "DB100.B3"));
-        list.add(new ItemDto(item_error, "报警信号", "DB100.B4"));
-        list.add(new ItemDto(item_task, "任务号", "DB100.D6"));
+        list.add(new ItemDto(item_heartbeat, "心跳", "DB112.B0"));
+        list.add(new ItemDto(item_mode, "工作模式", "DB112.B1", Boolean.valueOf(true)));
+        list.add(new ItemDto(item_move, "光电开关信号", "DB112.B2"));
+        list.add(new ItemDto(item_container_type, "托盘类型", "DB112.B3"));
+        list.add(new ItemDto(item_error, "报警信号", "DB112.B4"));
+        list.add(new ItemDto(item_task, "任务号", "DB112.D6"));
         return list;
     }
 
     public static List<ItemDto> getWriteableItemDtos() {
         ArrayList list = new ArrayList();
-        list.add(new ItemDto(item_to_command, "作业命令", "DB101.W0", Boolean.valueOf(true)));
-        list.add(new ItemDto(item_to_target, "目标站", "DB101.W2"));
-        list.add(new ItemDto(item_to_task, "任务号", "DB101.D4"));
-        list.add(new ItemDto(item_to_barcode, "条码", "DB101.W8"));
+        list.add(new ItemDto(item_to_command, "作业命令", "DB113.W0", Boolean.valueOf(true)));
+        list.add(new ItemDto(item_to_target, "目标站", "DB113.W2"));
+        list.add(new ItemDto(item_to_task, "任务号", "DB113.D4"));
+        list.add(new ItemDto(item_to_barcode, "条码", "DB113.W8"));
         return list;
     }
 
diff --git a/acs/nladmin-system/src/main/java/org/nl/acs/device_driver/lnsh/lnsh_palletizing_manipulator/ItemProtocol.java b/acs/nladmin-system/src/main/java/org/nl/acs/device_driver/lnsh/lnsh_palletizing_manipulator/ItemProtocol.java
index d38e37b..9f5dddf 100644
--- a/acs/nladmin-system/src/main/java/org/nl/acs/device_driver/lnsh/lnsh_palletizing_manipulator/ItemProtocol.java
+++ b/acs/nladmin-system/src/main/java/org/nl/acs/device_driver/lnsh/lnsh_palletizing_manipulator/ItemProtocol.java
@@ -196,40 +196,41 @@ public class ItemProtocol {
 
     public static List<ItemDto> getReadableItemDtos() {
         ArrayList list = new ArrayList();
-        list.add(new ItemDto(item_heartbeat, "心跳", "DB100.B0"));
-        list.add(new ItemDto(item_mode, "工作模式", "DB100.B1", Boolean.valueOf(true)));
-        list.add(new ItemDto(item_status, "设备状态", "DB100.B2"));
-        list.add(new ItemDto(item_error, "故障代码", "DB100.B3"));
-        list.add(new ItemDto(item_open_time, "开机时间", "DB100.STRING56.50"));
-        list.add(new ItemDto(item_standby_time, "待机时间", "DB100.D60"));
-        list.add(new ItemDto(item_production_time, "生产时间", "DB100.D64"));
-        list.add(new ItemDto(item_error_time, "故障时间", "DB100.D68"));
-        list.add(new ItemDto(item_get_station, "当前抓取工位", "DB100.D188"));
-        list.add(new ItemDto(item_put_station, "当前放置工位", "DB100.D189"));
-        list.add(new ItemDto(item_is_qualified, "是否合格", "DB100.D190"));
-        list.add(new ItemDto(item_laser_marking_code, "激光标刻码", "DB100.STRING192.50"));
-        list.add(new ItemDto(item_grinding_number, "碾次", "DB100.STRING244.50"));
-        list.add(new ItemDto(item_height1, "高度1", "DB100.D296"));
-        list.add(new ItemDto(item_height2, "高度2", "DB100.D300"));
-        list.add(new ItemDto(item_height3, "高度3", "DB100.D304"));
-        list.add(new ItemDto(item_height4, "高度4", "DB100.D308"));
-        list.add(new ItemDto(item_width1, "宽度1", "DB100.D312"));
-        list.add(new ItemDto(item_width2, "宽度2", "DB100.D316"));
-        list.add(new ItemDto(item_len, "长度", "DB100.D320"));
-        list.add(new ItemDto(item_volume, "体积", "DB100.D324"));
-        list.add(new ItemDto(item_flatness, "平面度", "DB100.D328"));
-        list.add(new ItemDto(item_unqualified_qty, "缺陷个数", "DB100.D332"));
+        list.add(new ItemDto(item_heartbeat, "心跳", "DB112.B0"));
+        list.add(new ItemDto(item_mode, "工作模式", "DB112.B1", Boolean.valueOf(true)));
+        list.add(new ItemDto(item_status, "设备状态", "DB112.B2"));
+        list.add(new ItemDto(item_status, "设备动作", "DB112.B3"));
+        list.add(new ItemDto(item_error, "故障代码", "DB112.B4"));
+        list.add(new ItemDto(item_open_time, "开机时间", "DB112.STRING6.50"));
+        list.add(new ItemDto(item_standby_time, "待机时间", "DB112.D58"));
+        list.add(new ItemDto(item_production_time, "生产时间", "DB112.D62"));
+        list.add(new ItemDto(item_error_time, "故障时间", "DB112.D66"));
+        list.add(new ItemDto(item_get_station, "当前抓取工位", "DB112.B70"));
+        list.add(new ItemDto(item_put_station, "当前放置工位", "DB112.B71"));
+        list.add(new ItemDto(item_is_qualified, "是否合格", "DB112.B72"));
+        list.add(new ItemDto(item_laser_marking_code, "激光标刻码", "DB112.STRING74.50"));
+        list.add(new ItemDto(item_grinding_number, "碾次", "DB112.STRING126.50"));
+        list.add(new ItemDto(item_height1, "高度1", "DB112.REAL178"));
+        list.add(new ItemDto(item_height2, "高度2", "DB112.REAL182"));
+        list.add(new ItemDto(item_height3, "高度3", "DB112.REAL186"));
+        list.add(new ItemDto(item_height4, "高度4", "DB112.REAL190"));
+        list.add(new ItemDto(item_width1, "宽度1", "DB112.REAL194"));
+        list.add(new ItemDto(item_width2, "宽度2", "DB112.REAL198"));
+        list.add(new ItemDto(item_len, "长度", "DB112.REAL202"));
+        list.add(new ItemDto(item_volume, "体积", "DB112.REAL206"));
+        list.add(new ItemDto(item_flatness, "平面度", "DB112.REAL210"));
+        list.add(new ItemDto(item_unqualified_qty, "缺陷个数", "DB112.REAL214"));
 
         return list;
     }
 
     public static List<ItemDto> getWriteableItemDtos() {
         ArrayList list = new ArrayList();
-        list.add(new ItemDto(item_to_command, "反馈", "DB101.W0", Boolean.TRUE));
-        list.add(new ItemDto(item_to_error, "error", "DB101.W2"));
-        list.add(new ItemDto(item_to_order_No, "工单号", "DB101.STRING4.50"));
-        list.add(new ItemDto(item_to_weight, "生产重量", "DB101.D56"));
-        list.add(new ItemDto(item_to_material_code, "下发物料编号", "DB101.STRING60.50"));
+        list.add(new ItemDto(item_to_command, "反馈", "DB113.W0", Boolean.TRUE));
+        list.add(new ItemDto(item_to_error, "error", "DB113.W2"));
+        list.add(new ItemDto(item_to_order_No, "工单号", "DB113.STRING4.50"));
+        list.add(new ItemDto(item_to_weight, "生产重量", "DB113.D56"));
+        list.add(new ItemDto(item_to_material_code, "下发物料编号", "DB113.STRING60.50"));
         return list;
     }
 
diff --git a/acs/nladmin-system/src/main/java/org/nl/acs/device_driver/lnsh/lnsh_palletizing_manipulator_site/ItemProtocol.java b/acs/nladmin-system/src/main/java/org/nl/acs/device_driver/lnsh/lnsh_palletizing_manipulator_site/ItemProtocol.java
index c5299cb..cbb053c 100644
--- a/acs/nladmin-system/src/main/java/org/nl/acs/device_driver/lnsh/lnsh_palletizing_manipulator_site/ItemProtocol.java
+++ b/acs/nladmin-system/src/main/java/org/nl/acs/device_driver/lnsh/lnsh_palletizing_manipulator_site/ItemProtocol.java
@@ -669,134 +669,134 @@ public class ItemProtocol {
 
     public static List<ItemDto> getReadableItemDtos() {
         ArrayList list = new ArrayList();
-        list.add(new ItemDto(item_heartbeat, "心跳", "DB100.B0"));
-        list.add(new ItemDto(item_mode, "工作模式", "DB100.B1", Boolean.valueOf(true)));
-        list.add(new ItemDto(item_move, "光电开关信号", "DB100.B2"));
-        list.add(new ItemDto(item_action, "取放信号", "DB100.B3"));
-        list.add(new ItemDto(item_ioaction, "进出信号", "DB100.B4"));
-        list.add(new ItemDto(item_error, "报警信号", "DB100.B5"));
-        list.add(new ItemDto(item_task, "任务号", "DB100.D6"));
-        list.add(new ItemDto(item_weight, "重量", "DB100.D10"));
-        list.add(new ItemDto(item_material, "物料", "DB100.STRING14.50"));
-        list.add(new ItemDto(item_barcode, "条码", "DB100.W66"));
-        list.add(new ItemDto(item_encoder_qty, "码盘位当前码盘数量", "DB100.W68"));
-        list.add(new ItemDto(item_unqualified_qty, "不合格数量", "DB100.W70"));
-        list.add(new ItemDto(item_product_code, "产品编号", "DB100.W72"));
-        list.add(new ItemDto(item_AlongSide, "A长边", "DB100.W74"));
-        list.add(new ItemDto(item_BshortSide, "B短边", "DB100.W76"));
-        list.add(new ItemDto(item_Htrapezoidal, "H梯形高", "DB100.W78"));
-        list.add(new ItemDto(item_Wthickness, "W厚度", "DB100.W80"));
-        list.add(new ItemDto(item_tray_qty, "当前垛盘数", "DB100.W82"));
-        list.add(new ItemDto(item_tray_high, "垛盘高度", "DB100.W84"));
-        list.add(new ItemDto(item_crib_category, "垛型类别", "DB100.W86"));
-        list.add(new ItemDto(item_palletX1_line, "码垛X1行", "DB100.W88"));
-        list.add(new ItemDto(item_palletY1_row, "码垛Y1列", "DB100.W90"));
-        list.add(new ItemDto(item_palletA1_angle, "码垛A1角度", "DB100.W92"));
-        list.add(new ItemDto(item_palletX2_line, "码垛X2行", "DB100.W94"));
-        list.add(new ItemDto(item_palletY2_row, "码垛Y2列", "DB100.W96"));
-        list.add(new ItemDto(item_palletA2_angle, "码垛A2角度", "DB100.W98"));
-        list.add(new ItemDto(item_palletX3_line, "码垛X3行", "DB100.W100"));
-        list.add(new ItemDto(item_palletY3_row, "码垛Y3列", "DB100.W102"));
-        list.add(new ItemDto(item_palletA3_angle, "码垛A3角度", "DB100.W104"));
-        list.add(new ItemDto(item_pressCribX1_line, "压垛X1行", "DB100.W106"));
-        list.add(new ItemDto(item_pressCribY1_row, "压垛Y1列", "DB100.W108"));
-        list.add(new ItemDto(item_pressCribA1_angle, "压垛A1角度", "DB100.W110"));
-        list.add(new ItemDto(item_pressCribX2_line, "压垛X2行", "DB100.W112"));
-        list.add(new ItemDto(item_pressCribY2_row, "压垛Y2列", "DB100.W114"));
-        list.add(new ItemDto(item_pressCribA2_angle, "压垛A2角度", "DB100.W116"));
-        list.add(new ItemDto(item_pressCribX3_line, "压垛X3行", "DB100.W118"));
-        list.add(new ItemDto(item_pressCribY3_row, "压垛Y3列", "DB100.W120"));
-        list.add(new ItemDto(item_pressCribA3_angle, "压垛A3角度", "DB100.W122"));
-        list.add(new ItemDto(item_Zoffset, "Z轴偏移", "DB100.W124"));
-        list.add(new ItemDto(item_pallet_layerQty, "码垛层数", "DB100.W126"));
-        list.add(new ItemDto(item_pressCrib_layerQty, "压垛层数", "DB100.W128"));
-        list.add(new ItemDto(item_codeLayerX1_interval, "码层X1间隔", "DB100.W130"));
-        list.add(new ItemDto(item_codeLayerY1_interval, "码层Y1间隔", "DB100.W132"));
-        list.add(new ItemDto(item_codeLayerX2_interval, "码层X2间隔", "DB100.W134"));
-        list.add(new ItemDto(item_codeLayerY2_interval, "码层Y2间隔", "DB100.W136"));
-        list.add(new ItemDto(item_codeLayerX3_interval, "码层X3间隔", "DB100.W138"));
-        list.add(new ItemDto(item_codeLayerY3_interval, "码层Y3间隔", "DB100.W140"));
-        list.add(new ItemDto(item_codeLayerX1_offset, "码层X1偏移", "DB100.W142"));
-        list.add(new ItemDto(item_codeLayerY1_offset, "码层Y1偏移", "DB100.W144"));
-        list.add(new ItemDto(item_codeLayerX2_offset, "码层X2偏移", "DB100.W146"));
-        list.add(new ItemDto(item_codeLayerY2_offset, "码层Y2偏移", "DB100.W148"));
-        list.add(new ItemDto(item_codeLayerX3_offset, "码层X3偏移", "DB100.W150"));
-        list.add(new ItemDto(item_codeLayerY3_offset, "码层Y3偏移", "DB100.W152"));
-        list.add(new ItemDto(item_pressLayerX1_interval, "压层X1间隔", "DB100.W154"));
-        list.add(new ItemDto(item_pressLayerY1_interval, "压层Y1间隔", "DB100.W156"));
-        list.add(new ItemDto(item_pressLayerX2_interval, "压层X2间隔", "DB100.W158"));
-        list.add(new ItemDto(item_pressLayerY2_interval, "压层Y2间隔", "DB100.W160"));
-        list.add(new ItemDto(item_pressLayerX3_interval, "压层X3间隔", "DB100.W162"));
-        list.add(new ItemDto(item_pressLayerY3_interval, "压层Y3间隔", "DB100.W164"));
-        list.add(new ItemDto(item_pressLayerX1_offset, "压层X1偏移", "DB100.W166"));
-        list.add(new ItemDto(item_pressLayerY1_offset, "压层Y1偏移", "DB100.W168"));
-        list.add(new ItemDto(item_pressLayerX2_offset, "压层X2偏移", "DB100.W170"));
-        list.add(new ItemDto(item_pressLayerY2_offset, "压层Y2偏移", "DB100.W172"));
-        list.add(new ItemDto(item_pressLayerX3_offset, "压层X3偏移", "DB100.W174"));
-        list.add(new ItemDto(item_pressLayerY3_offset, "压层Y3偏移", "DB100.W176"));
-        list.add(new ItemDto(item_tool_coordinate, "工具坐标", "DB100.W178"));
+        list.add(new ItemDto(item_heartbeat, "心跳", "DB112.B0"));
+        list.add(new ItemDto(item_mode, "工作模式", "DB112.B1", Boolean.valueOf(true)));
+        list.add(new ItemDto(item_move, "光电开关信号", "DB112.B2"));
+        list.add(new ItemDto(item_action, "取放信号", "DB112.B3"));
+        list.add(new ItemDto(item_ioaction, "进出信号", "DB112.B4"));
+        list.add(new ItemDto(item_error, "报警信号", "DB112.B5"));
+        list.add(new ItemDto(item_task, "任务号", "DB112.D6"));
+        list.add(new ItemDto(item_weight, "重量", "DB112.D10"));
+        list.add(new ItemDto(item_material, "物料", "DB112.STRING14.50"));
+        list.add(new ItemDto(item_barcode, "条码", "DB112.W66"));
+        list.add(new ItemDto(item_encoder_qty, "码盘位当前码盘数量", "DB112.W68"));
+        list.add(new ItemDto(item_unqualified_qty, "不合格数量", "DB112.W70"));
+        list.add(new ItemDto(item_product_code, "产品编号", "DB112.B72"));
+        list.add(new ItemDto(item_AlongSide, "A长边", "DB112.W74"));
+        list.add(new ItemDto(item_BshortSide, "B短边", "DB112.W76"));
+        list.add(new ItemDto(item_Htrapezoidal, "H梯形高", "DB112.W78"));
+        list.add(new ItemDto(item_Wthickness, "W厚度", "DB112.W80"));
+        list.add(new ItemDto(item_tray_qty, "当前垛盘数", "DB112.W82"));
+        list.add(new ItemDto(item_tray_high, "垛盘高度", "DB112.W84"));
+        list.add(new ItemDto(item_crib_category, "垛型类别", "DB112.W86"));
+        list.add(new ItemDto(item_palletX1_line, "码垛X1行", "DB112.W88"));
+        list.add(new ItemDto(item_palletY1_row, "码垛Y1列", "DB112.W90"));
+        list.add(new ItemDto(item_palletA1_angle, "码垛A1角度", "DB112.W92"));
+        list.add(new ItemDto(item_palletX2_line, "码垛X2行", "DB112.W94"));
+        list.add(new ItemDto(item_palletY2_row, "码垛Y2列", "DB112.W96"));
+        list.add(new ItemDto(item_palletA2_angle, "码垛A2角度", "DB112.W98"));
+        list.add(new ItemDto(item_palletX3_line, "码垛X3行", "DB112.W100"));
+        list.add(new ItemDto(item_palletY3_row, "码垛Y3列", "DB112.W102"));
+        list.add(new ItemDto(item_palletA3_angle, "码垛A3角度", "DB112.W104"));
+        list.add(new ItemDto(item_pressCribX1_line, "压垛X1行", "DB112.W106"));
+        list.add(new ItemDto(item_pressCribY1_row, "压垛Y1列", "DB112.W108"));
+        list.add(new ItemDto(item_pressCribA1_angle, "压垛A1角度", "DB112.W110"));
+        list.add(new ItemDto(item_pressCribX2_line, "压垛X2行", "DB112.W112"));
+        list.add(new ItemDto(item_pressCribY2_row, "压垛Y2列", "DB112.W114"));
+        list.add(new ItemDto(item_pressCribA2_angle, "压垛A2角度", "DB112.W116"));
+        list.add(new ItemDto(item_pressCribX3_line, "压垛X3行", "DB112.W118"));
+        list.add(new ItemDto(item_pressCribY3_row, "压垛Y3列", "DB112.W120"));
+        list.add(new ItemDto(item_pressCribA3_angle, "压垛A3角度", "DB112.W122"));
+        list.add(new ItemDto(item_Zoffset, "Z轴偏移", "DB112.W124"));
+        list.add(new ItemDto(item_pallet_layerQty, "码垛层数", "DB112.W126"));
+        list.add(new ItemDto(item_pressCrib_layerQty, "压垛层数", "DB112.W128"));
+        list.add(new ItemDto(item_codeLayerX1_interval, "码层X1间隔", "DB112.W130"));
+        list.add(new ItemDto(item_codeLayerY1_interval, "码层Y1间隔", "DB112.W132"));
+        list.add(new ItemDto(item_codeLayerX2_interval, "码层X2间隔", "DB112.W134"));
+        list.add(new ItemDto(item_codeLayerY2_interval, "码层Y2间隔", "DB112.W136"));
+        list.add(new ItemDto(item_codeLayerX3_interval, "码层X3间隔", "DB112.W138"));
+        list.add(new ItemDto(item_codeLayerY3_interval, "码层Y3间隔", "DB112.W140"));
+        list.add(new ItemDto(item_codeLayerX1_offset, "码层X1偏移", "DB112.W142"));
+        list.add(new ItemDto(item_codeLayerY1_offset, "码层Y1偏移", "DB112.W144"));
+        list.add(new ItemDto(item_codeLayerX2_offset, "码层X2偏移", "DB112.W146"));
+        list.add(new ItemDto(item_codeLayerY2_offset, "码层Y2偏移", "DB112.W148"));
+        list.add(new ItemDto(item_codeLayerX3_offset, "码层X3偏移", "DB112.W150"));
+        list.add(new ItemDto(item_codeLayerY3_offset, "码层Y3偏移", "DB112.W152"));
+        list.add(new ItemDto(item_pressLayerX1_interval, "压层X1间隔", "DB112.W154"));
+        list.add(new ItemDto(item_pressLayerY1_interval, "压层Y1间隔", "DB112.W156"));
+        list.add(new ItemDto(item_pressLayerX2_interval, "压层X2间隔", "DB112.W158"));
+        list.add(new ItemDto(item_pressLayerY2_interval, "压层Y2间隔", "DB112.W160"));
+        list.add(new ItemDto(item_pressLayerX3_interval, "压层X3间隔", "DB112.W162"));
+        list.add(new ItemDto(item_pressLayerY3_interval, "压层Y3间隔", "DB112.W164"));
+        list.add(new ItemDto(item_pressLayerX1_offset, "压层X1偏移", "DB112.W166"));
+        list.add(new ItemDto(item_pressLayerY1_offset, "压层Y1偏移", "DB112.W168"));
+        list.add(new ItemDto(item_pressLayerX2_offset, "压层X2偏移", "DB112.W170"));
+        list.add(new ItemDto(item_pressLayerY2_offset, "压层Y2偏移", "DB112.W172"));
+        list.add(new ItemDto(item_pressLayerX3_offset, "压层X3偏移", "DB112.W174"));
+        list.add(new ItemDto(item_pressLayerY3_offset, "压层Y3偏移", "DB112.W176"));
+        list.add(new ItemDto(item_tool_coordinate, "工具坐标", "DB112.W178"));
         return list;
     }
 
     public static List<ItemDto> getWriteableItemDtos() {
         ArrayList list = new ArrayList();
-        list.add(new ItemDto(item_to_command, "作业命令", "DB101.W0", Boolean.valueOf(true)));
-        list.add(new ItemDto(item_to_target, "目标站", "DB101.W2"));
-        list.add(new ItemDto(item_to_task, "任务号", "DB101.D4"));
-        list.add(new ItemDto(item_to_product_code, "产品编号", "DB101.W8"));
-        list.add(new ItemDto(item_to_AlongSide, "A长边", "DB101.W10"));
-        list.add(new ItemDto(item_to_BshortSide, "B短边", "DB101.W12"));
-        list.add(new ItemDto(item_to_Htrapezoidal, "H梯形高", "DB101.W14"));
-        list.add(new ItemDto(item_to_Wthickness, "W厚度", "DB101.W16"));
-        list.add(new ItemDto(item_to_tray_qty, "当前垛盘数", "DB101.W18"));
-        list.add(new ItemDto(item_to_tray_high, "垛盘高度", "DB101.W20"));
-        list.add(new ItemDto(item_to_crib_category, "垛型类别", "DB101.W22"));
-        list.add(new ItemDto(item_to_palletX1_line, "码垛X1行", "DB101.W24"));
-        list.add(new ItemDto(item_to_palletY1_row, "码垛Y1列", "DB101.W26"));
-        list.add(new ItemDto(item_to_palletA1_angle, "码垛A1角度", "DB101.W28"));
-        list.add(new ItemDto(item_to_palletX2_line, "码垛X2行", "DB101.W30"));
-        list.add(new ItemDto(item_to_palletY2_row, "码垛Y2列", "DB101.W32"));
-        list.add(new ItemDto(item_to_palletA2_angle, "码垛A2角度", "DB101.W34"));
-        list.add(new ItemDto(item_to_palletX3_line, "码垛X3行", "DB101.W36"));
-        list.add(new ItemDto(item_to_palletY3_row, "码垛Y3列", "DB101.W38"));
-        list.add(new ItemDto(item_to_palletA3_angle, "码垛A3角度", "DB101.W40"));
-        list.add(new ItemDto(item_to_pressCribX1_line, "压垛X1行", "DB101.W42"));
-        list.add(new ItemDto(item_to_pressCribY1_row, "压垛Y1列", "DB101.W44"));
-        list.add(new ItemDto(item_to_pressCribA1_angle, "压垛A1角度", "DB101.W46"));
-        list.add(new ItemDto(item_to_pressCribX2_line, "压垛X2行", "DB101.W48"));
-        list.add(new ItemDto(item_to_pressCribY2_row, "压垛Y2列", "DB101.W50"));
-        list.add(new ItemDto(item_to_pressCribA2_angle, "压垛A2角度", "DB101.W52"));
-        list.add(new ItemDto(item_to_pressCribX3_line, "压垛X3行", "DB101.W54"));
-        list.add(new ItemDto(item_to_pressCribY3_row, "压垛Y3列", "DB101.W56"));
-        list.add(new ItemDto(item_to_pressCribA3_angle, "压垛A3角度", "DB101.W58"));
-        list.add(new ItemDto(item_to_Zoffset, "Z轴偏移", "DB101.W60"));
-        list.add(new ItemDto(item_to_pallet_layerQty, "码垛层数", "DB101.W62"));
-        list.add(new ItemDto(item_to_pressCrib_layerQty, "压垛层数", "DB101.W64"));
-        list.add(new ItemDto(item_to_codeLayerX1_interval, "码层X1间隔", "DB101.W66"));
-        list.add(new ItemDto(item_to_codeLayerY1_interval, "码层Y1间隔", "DB101.W68"));
-        list.add(new ItemDto(item_to_codeLayerX2_interval, "码层X2间隔", "DB101.W70"));
-        list.add(new ItemDto(item_to_codeLayerY2_interval, "码层Y2间隔", "DB101.W72"));
-        list.add(new ItemDto(item_to_codeLayerX3_interval, "码层X3间隔", "DB101.W74"));
-        list.add(new ItemDto(item_to_codeLayerY3_interval, "码层Y3间隔", "DB101.W76"));
-        list.add(new ItemDto(item_to_codeLayerX1_offset, "码层X1偏移", "DB101.W78"));
-        list.add(new ItemDto(item_to_codeLayerY1_offset, "码层Y1偏移", "DB101.W80"));
-        list.add(new ItemDto(item_to_codeLayerX2_offset, "码层X2偏移", "DB101.W82"));
-        list.add(new ItemDto(item_to_codeLayerY2_offset, "码层Y2偏移", "DB101.W84"));
-        list.add(new ItemDto(item_to_codeLayerX3_offset, "码层X3偏移", "DB101.W86"));
-        list.add(new ItemDto(item_to_codeLayerY3_offset, "码层Y3偏移", "DB101.W88"));
-        list.add(new ItemDto(item_to_pressLayerX1_interval, "压层X1间隔", "DB101.W90"));
-        list.add(new ItemDto(item_to_pressLayerY1_interval, "压层Y1间隔", "DB101.W92"));
-        list.add(new ItemDto(item_to_pressLayerX2_interval, "压层X2间隔", "DB101.W94"));
-        list.add(new ItemDto(item_to_pressLayerY2_interval, "压层Y2间隔", "DB101.W96"));
-        list.add(new ItemDto(item_to_pressLayerX3_interval, "压层X3间隔", "DB101.W98"));
-        list.add(new ItemDto(item_to_pressLayerY3_interval, "压层Y3间隔", "DB101.W100"));
-        list.add(new ItemDto(item_to_pressLayerX1_offset, "压层X1偏移", "DB101.W102"));
-        list.add(new ItemDto(item_to_pressLayerY1_offset, "压层Y1偏移", "DB101.W104"));
-        list.add(new ItemDto(item_to_pressLayerX2_offset, "压层X2偏移", "DB101.W106"));
-        list.add(new ItemDto(item_to_pressLayerY2_offset, "压层Y2偏移", "DB101.W108"));
-        list.add(new ItemDto(item_to_pressLayerX3_offset, "压层X3偏移", "DB101.W110"));
-        list.add(new ItemDto(item_to_pressLayerY3_offset, "压层Y3偏移", "DB101.W112"));
-        list.add(new ItemDto(item_to_tool_coordinate, "工具坐标", "DB101.W114"));
+        list.add(new ItemDto(item_to_command, "作业命令", "DB113.W0", Boolean.valueOf(true)));
+        list.add(new ItemDto(item_to_target, "目标站", "DB113.W2"));
+        list.add(new ItemDto(item_to_task, "任务号", "DB113.D4"));
+        list.add(new ItemDto(item_to_product_code, "产品编号", "DB113.B8"));
+        list.add(new ItemDto(item_to_AlongSide, "A长边", "DB113.W10"));
+        list.add(new ItemDto(item_to_BshortSide, "B短边", "DB113.W12"));
+        list.add(new ItemDto(item_to_Htrapezoidal, "H梯形高", "DB113.W14"));
+        list.add(new ItemDto(item_to_Wthickness, "W厚度", "DB113.W16"));
+        list.add(new ItemDto(item_to_tray_qty, "当前垛盘数", "DB113.W18"));
+        list.add(new ItemDto(item_to_tray_high, "垛盘高度", "DB113.W20"));
+        list.add(new ItemDto(item_to_crib_category, "垛型类别", "DB113.W22"));
+        list.add(new ItemDto(item_to_palletX1_line, "码垛X1行", "DB113.W24"));
+        list.add(new ItemDto(item_to_palletY1_row, "码垛Y1列", "DB113.W26"));
+        list.add(new ItemDto(item_to_palletA1_angle, "码垛A1角度", "DB113.W28"));
+        list.add(new ItemDto(item_to_palletX2_line, "码垛X2行", "DB113.W30"));
+        list.add(new ItemDto(item_to_palletY2_row, "码垛Y2列", "DB113.W32"));
+        list.add(new ItemDto(item_to_palletA2_angle, "码垛A2角度", "DB113.W34"));
+        list.add(new ItemDto(item_to_palletX3_line, "码垛X3行", "DB113.W36"));
+        list.add(new ItemDto(item_to_palletY3_row, "码垛Y3列", "DB113.W38"));
+        list.add(new ItemDto(item_to_palletA3_angle, "码垛A3角度", "DB113.W40"));
+        list.add(new ItemDto(item_to_pressCribX1_line, "压垛X1行", "DB113.W42"));
+        list.add(new ItemDto(item_to_pressCribY1_row, "压垛Y1列", "DB113.W44"));
+        list.add(new ItemDto(item_to_pressCribA1_angle, "压垛A1角度", "DB113.W46"));
+        list.add(new ItemDto(item_to_pressCribX2_line, "压垛X2行", "DB113.W48"));
+        list.add(new ItemDto(item_to_pressCribY2_row, "压垛Y2列", "DB113.W50"));
+        list.add(new ItemDto(item_to_pressCribA2_angle, "压垛A2角度", "DB113.W52"));
+        list.add(new ItemDto(item_to_pressCribX3_line, "压垛X3行", "DB113.W54"));
+        list.add(new ItemDto(item_to_pressCribY3_row, "压垛Y3列", "DB113.W56"));
+        list.add(new ItemDto(item_to_pressCribA3_angle, "压垛A3角度", "DB113.W58"));
+        list.add(new ItemDto(item_to_Zoffset, "Z轴偏移", "DB113.W60"));
+        list.add(new ItemDto(item_to_pallet_layerQty, "码垛层数", "DB113.W62"));
+        list.add(new ItemDto(item_to_pressCrib_layerQty, "压垛层数", "DB113.W64"));
+        list.add(new ItemDto(item_to_codeLayerX1_interval, "码层X1间隔", "DB113.W66"));
+        list.add(new ItemDto(item_to_codeLayerY1_interval, "码层Y1间隔", "DB113.W68"));
+        list.add(new ItemDto(item_to_codeLayerX2_interval, "码层X2间隔", "DB113.W70"));
+        list.add(new ItemDto(item_to_codeLayerY2_interval, "码层Y2间隔", "DB113.W72"));
+        list.add(new ItemDto(item_to_codeLayerX3_interval, "码层X3间隔", "DB113.W74"));
+        list.add(new ItemDto(item_to_codeLayerY3_interval, "码层Y3间隔", "DB113.W76"));
+        list.add(new ItemDto(item_to_codeLayerX1_offset, "码层X1偏移", "DB113.W78"));
+        list.add(new ItemDto(item_to_codeLayerY1_offset, "码层Y1偏移", "DB113.W80"));
+        list.add(new ItemDto(item_to_codeLayerX2_offset, "码层X2偏移", "DB113.W82"));
+        list.add(new ItemDto(item_to_codeLayerY2_offset, "码层Y2偏移", "DB113.W84"));
+        list.add(new ItemDto(item_to_codeLayerX3_offset, "码层X3偏移", "DB113.W86"));
+        list.add(new ItemDto(item_to_codeLayerY3_offset, "码层Y3偏移", "DB113.W88"));
+        list.add(new ItemDto(item_to_pressLayerX1_interval, "压层X1间隔", "DB113.W90"));
+        list.add(new ItemDto(item_to_pressLayerY1_interval, "压层Y1间隔", "DB113.W92"));
+        list.add(new ItemDto(item_to_pressLayerX2_interval, "压层X2间隔", "DB113.W94"));
+        list.add(new ItemDto(item_to_pressLayerY2_interval, "压层Y2间隔", "DB113.W96"));
+        list.add(new ItemDto(item_to_pressLayerX3_interval, "压层X3间隔", "DB113.W98"));
+        list.add(new ItemDto(item_to_pressLayerY3_interval, "压层Y3间隔", "DB113.W100"));
+        list.add(new ItemDto(item_to_pressLayerX1_offset, "压层X1偏移", "DB113.W102"));
+        list.add(new ItemDto(item_to_pressLayerY1_offset, "压层Y1偏移", "DB113.W104"));
+        list.add(new ItemDto(item_to_pressLayerX2_offset, "压层X2偏移", "DB113.W106"));
+        list.add(new ItemDto(item_to_pressLayerY2_offset, "压层Y2偏移", "DB113.W108"));
+        list.add(new ItemDto(item_to_pressLayerX3_offset, "压层X3偏移", "DB113.W110"));
+        list.add(new ItemDto(item_to_pressLayerY3_offset, "压层Y3偏移", "DB113.W112"));
+        list.add(new ItemDto(item_to_tool_coordinate, "工具坐标", "DB113.W114"));
         return list;
     }
 
diff --git a/acs/nladmin-system/src/main/java/org/nl/acs/device_driver/lnsh/lnsh_press/ItemProtocol.java b/acs/nladmin-system/src/main/java/org/nl/acs/device_driver/lnsh/lnsh_press/ItemProtocol.java
index 39d4207..738bc92 100644
--- a/acs/nladmin-system/src/main/java/org/nl/acs/device_driver/lnsh/lnsh_press/ItemProtocol.java
+++ b/acs/nladmin-system/src/main/java/org/nl/acs/device_driver/lnsh/lnsh_press/ItemProtocol.java
@@ -207,46 +207,46 @@ public class ItemProtocol {
 
     public static List<ItemDto> getReadableItemDtos() {
         ArrayList list = new ArrayList();
-        list.add(new ItemDto(item_heartbeat, "心跳", "DB100.B0"));
-        list.add(new ItemDto(item_mode, "工作模式", "DB100.B1", Boolean.valueOf(true)));
-        list.add(new ItemDto(item_status, "设备状态", "DB100.B2"));
-        list.add(new ItemDto(item_error, "故障", "DB100.B3"));
-        list.add(new ItemDto(item_open_time, "开机时间", "DB100.STRING4.50"));
-        list.add(new ItemDto(item_standby_time, "待机时间", "DB100.D56"));
-        list.add(new ItemDto(item_production_time, "生产时间", "DB100.D60"));
-        list.add(new ItemDto(item_error_time, "故障时间", "DB100.D64"));
-        list.add(new ItemDto(item_material, "当前生产物料", "DB100.STRING68.50"));
-        list.add(new ItemDto(item_qty, "当前已生产数量", "DB100.D120"));
-        list.add(new ItemDto(item_weight, "当前已生产重量", "DB100.D124"));
-        list.add(new ItemDto(item_qualified, "当前已生产合格数", "DB100.D128"));
-        list.add(new ItemDto(item_unqualified, "当前已生产不合格数", "DB100.D132"));
-        list.add(new ItemDto(item_order_No, "工单号", "DB100.STRING136.50"));
+        list.add(new ItemDto(item_heartbeat, "心跳", "DB112.B0"));
+        list.add(new ItemDto(item_mode, "工作模式", "DB112.B1", Boolean.valueOf(true)));
+        list.add(new ItemDto(item_status, "设备状态", "DB112.B2"));
+        list.add(new ItemDto(item_error, "故障", "DB112.B3"));
+        list.add(new ItemDto(item_open_time, "开机时间", "DB112.STRING4.50"));
+        list.add(new ItemDto(item_standby_time, "待机时间", "DB112.D56"));
+        list.add(new ItemDto(item_production_time, "生产时间", "DB112.D60"));
+        list.add(new ItemDto(item_error_time, "故障时间", "DB112.D64"));
+        list.add(new ItemDto(item_material, "当前生产物料", "DB112.STRING68.50"));
+        list.add(new ItemDto(item_qty, "当前已生产数量", "DB112.D120"));
+        list.add(new ItemDto(item_weight, "当前已生产重量", "DB112.D124"));
+        list.add(new ItemDto(item_qualified, "当前已生产合格数", "DB112.D128"));
+        list.add(new ItemDto(item_unqualified, "当前已生产不合格数", "DB112.D132"));
+        list.add(new ItemDto(item_order_No, "工单号", "DB112.STRING136.50"));
         return list;
     }
 
     public static List<ItemDto> getWriteableItemDtos() {
         ArrayList list = new ArrayList();
-        list.add(new ItemDto(item_to_command, "反馈", "DB101.W0", Boolean.valueOf(true)));
-        list.add(new ItemDto(item_to_error, "error", "DB101.W2"));
-        list.add(new ItemDto(item_to_order_No, "工单号", "DB101.STRING4.50"));
-        list.add(new ItemDto(item_to_qty, "生产重量", "DB101.D56"));
-        list.add(new ItemDto(item_to_material_code, "下发物料编号", "DB101.STRING60.50"));
-        list.add(new ItemDto(item_to_brick_code, "砖型代号", "DB101.STRING112.50"));
-        list.add(new ItemDto(item_to_formula, "配方代号", "DB101.STRING164.50"));
-        list.add(new ItemDto(item_to_product_code, "产品编号", "DB101.W216"));
-        list.add(new ItemDto(item_to_AlongSide, "A长边", "DB101.W218"));
-        list.add(new ItemDto(item_to_BshortSide, "B短边", "DB101.W220"));
-        list.add(new ItemDto(item_to_Htrapezoidal, "H梯形高", "DB101.W222"));
-        list.add(new ItemDto(item_to_Wthickness, "W厚度", "DB101.W224"));
-        list.add(new ItemDto(item_to_size_error, "尺寸允许误差", "DB101.REAL228"));
-        list.add(new ItemDto(item_to_single_weight, "单重允许误差", "DB101.REAL232"));
-        list.add(new ItemDto(item_to_drawing_address, "图纸地址", "DB101.REAL236"));
-        list.add(new ItemDto(item_to_standard_weight, "标准重量", "DB101.REAL240"));
-        list.add(new ItemDto(item_to_detection_error, "检测误差值", "DB101.REAL244"));
-        list.add(new ItemDto(item_to_standard_size_height1, "标准尺寸高度1", "DB101.REAL248"));
-        list.add(new ItemDto(item_to_standard_size_height2, "标准尺寸高度2", "DB101.REAL252"));
-        list.add(new ItemDto(item_to_standard_size_height3, "标准尺寸高度3", "DB101.REAL256"));
-        list.add(new ItemDto(item_to_standard_size_height4, "标准尺寸高度4", "DB101.REAL260"));
+        list.add(new ItemDto(item_to_command, "反馈", "DB113.W0", Boolean.valueOf(true)));
+        list.add(new ItemDto(item_to_error, "error", "DB113.W2"));
+        list.add(new ItemDto(item_to_order_No, "工单号", "DB113.STRING4.50"));
+        list.add(new ItemDto(item_to_qty, "生产重量", "DB113.D56"));
+        list.add(new ItemDto(item_to_material_code, "下发物料编号", "DB113.STRING60.50"));
+        list.add(new ItemDto(item_to_brick_code, "砖型代号", "DB113.STRING112.50"));
+        list.add(new ItemDto(item_to_formula, "配方代号", "DB113.STRING164.50"));
+        list.add(new ItemDto(item_to_product_code, "产品编号", "DB113.W216"));
+        list.add(new ItemDto(item_to_AlongSide, "A长边", "DB113.W218"));
+        list.add(new ItemDto(item_to_BshortSide, "B短边", "DB113.W220"));
+        list.add(new ItemDto(item_to_Htrapezoidal, "H梯形高", "DB113.W222"));
+        list.add(new ItemDto(item_to_Wthickness, "W厚度", "DB113.W224"));
+        list.add(new ItemDto(item_to_size_error, "尺寸允许误差", "DB113.REAL228"));
+        list.add(new ItemDto(item_to_single_weight, "单重允许误差", "DB113.REAL232"));
+        list.add(new ItemDto(item_to_drawing_address, "图纸地址", "DB113.REAL236"));
+        list.add(new ItemDto(item_to_standard_weight, "标准重量", "DB113.REAL240"));
+        list.add(new ItemDto(item_to_detection_error, "检测误差值", "DB113.REAL244"));
+        list.add(new ItemDto(item_to_standard_size_height1, "标准尺寸高度1", "DB113.REAL248"));
+        list.add(new ItemDto(item_to_standard_size_height2, "标准尺寸高度2", "DB113.REAL252"));
+        list.add(new ItemDto(item_to_standard_size_height3, "标准尺寸高度3", "DB113.REAL256"));
+        list.add(new ItemDto(item_to_standard_size_height4, "标准尺寸高度4", "DB113.REAL260"));
         return list;
     }
 
diff --git a/acs/nladmin-system/src/main/java/org/nl/acs/device_driver/lnsh/lnsh_press/LnshPressDefination.java b/acs/nladmin-system/src/main/java/org/nl/acs/device_driver/lnsh/lnsh_press/LnshPressDefination.java
index 58f77f5..cc4dc40 100644
--- a/acs/nladmin-system/src/main/java/org/nl/acs/device_driver/lnsh/lnsh_press/LnshPressDefination.java
+++ b/acs/nladmin-system/src/main/java/org/nl/acs/device_driver/lnsh/lnsh_press/LnshPressDefination.java
@@ -52,27 +52,9 @@ public class LnshPressDefination implements OpcDeviceDriverDefination {
 
     @Override
     public List<ItemDto> getReadableItemDtos() {
-        return getReadableItemDtos2();
+        return ItemProtocol.getReadableItemDtos();
     }
 
-    public static List<ItemDto> getReadableItemDtos2() {
-        ArrayList list = new ArrayList();
-        list.add(new ItemDto(ItemProtocol.item_heartbeat, "心跳", "DB8.B0"));
-        list.add(new ItemDto(ItemProtocol.item_mode, "工作模式", "DB8.B1", Boolean.valueOf(true)));
-        list.add(new ItemDto(ItemProtocol.item_status, "设备状态", "DB8.B2"));
-        list.add(new ItemDto(ItemProtocol.item_error, "故障", "DB8.B3"));
-        list.add(new ItemDto(ItemProtocol.item_open_time, "开机时间", "DB8.STRING4.50"));
-        list.add(new ItemDto(ItemProtocol.item_standby_time, "待机时间", "DB8.D56"));
-        list.add(new ItemDto(ItemProtocol.item_production_time, "生产时间", "DB8.D60"));
-        list.add(new ItemDto(ItemProtocol.item_error_time, "故障时间", "DB8.D64"));
-        list.add(new ItemDto(ItemProtocol.item_material, "当前生产物料", "DB8.STRING68.50"));
-        list.add(new ItemDto(ItemProtocol.item_qty, "当前已生产数量", "DB8.D120"));
-        list.add(new ItemDto(ItemProtocol.item_weight, "当前已生产重量", "DB8.D124"));
-        list.add(new ItemDto(ItemProtocol.item_qualified, "当前已生产合格数", "DB8.D128"));
-        list.add(new ItemDto(ItemProtocol.item_unqualified, "当前已生产不合格数", "DB8.D132"));
-        list.add(new ItemDto(ItemProtocol.item_order_No, "工单号", "DB8.STRING136.50"));
-        return list;
-    }
 
     @Override
     public List<ItemDto> getWriteableItemDtos() {
diff --git a/acs/nladmin-ui/public/config.js b/acs/nladmin-ui/public/config.js
index 9eea79c..56d6c09 100644
--- a/acs/nladmin-ui/public/config.js
+++ b/acs/nladmin-ui/public/config.js
@@ -1,9 +1,9 @@
 window.g = {
   dev: {
-    VUE_APP_BASE_API: 'http://192.168.4.210:8010'
+    VUE_APP_BASE_API: 'http://127.0.0.1:8010'
   },
   prod: {
-    VUE_APP_BASE_API: 'http://192.168.4.210:8010'
+    VUE_APP_BASE_API: 'http://10.93.41.198:8010'
 
   }